The piston engine: four-stroke cycle – Private Pilot Theory aviation lesson
Lesson 151 of 228 in the Private Pilot Theory course (ages 16+)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
Follow one cylinder through intake, compression, power and exhaust, and see why detonation and pre-ignition matter.
- Time
- 45 minutes + 10 min homework
- Course
- Private Pilot Theory (ages 16+)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams. Rules and values on this page are given as of November 2026. Always check the current official source (the UK CAA) before relying on them.
How to use this lesson
This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think only one of the four strokes produces power, yet the piston engine still runs smoothly?”
- Later: the homework, then the practice test.
Watch out for
- Calling "ignition" one of the four strokes. The strokes are intake, compression, power and exhaust; ignition happens at the end of compression.
- Thinking one cycle is one crankshaft turn. Four strokes take two turns, so each cylinder fires once every two revolutions.
- Confusing detonation and pre-ignition. Detonation is explosive burning after the spark; pre-ignition is the charge lighting before the spark from a hot spot.
Hands-on: Make a "four-stroke wheel": cut a card circle, divide it into four quarters labelled intake, compression, power and exhaust, and turn it twice round a pencil while saying what each valve and the piston are doing. Count how many full turns one cycle takes.
What you will learn
- I can name the four strokes in order.
- I can say what happens in each stroke.
- I can explain the difference between spark ignition and compression ignition.
- I can explain detonation and pre-ignition.
- I can work out power strokes per minute from rpm.
Key words
- stroke
- One movement of the piston from one end of the cylinder to the other.
- spark ignition
- Igniting a pre-mixed fuel–air charge with a spark plug.
- compression ignition
- Igniting fuel that is injected into air heated by compression (the diesel idea).
- detonation
- Uncontrolled, explosive burning of the charge, usually at high power and high cylinder head temperature.
- pre-ignition
- Ignition before the spark, set off by a hot spot such as a carbon deposit.
The big ideas
Most light aeroplanes use a four-stroke piston engine. The PHAK (chapter 7) lists the strokes as intake, compression, power and exhaust. Each stroke is one movement of the piston along the cylinder, so one complete cycle takes two turns of the crankshaft and each cylinder fires once in that time.
Spark-ignition piston engines – the usual type in light aircraft – ignite a pre-mixed fuel and air charge with a spark plug. Compression-ignition (diesel-type) piston engines ignite injected fuel using the heat of compression.
Two kinds of abnormal combustion matter to pilots. Detonation is an uncontrolled explosive ignition, typically at high power with high cylinder head temperatures. Pre-ignition is ignition before the spark, from a hot spot. A fuel's octane rating measures its resistance to knock (detonation). This is theory for understanding, not operating guidance.
Read-through: the teaching steps
Intake
The intake valve opens and the piston moves down, drawing the fuel–air mixture into the cylinder.
Compression
Both valves are closed. The piston moves up and squeezes the mixture into a small space.
Power
Near the top of the compression stroke the spark plugs fire. The burning mixture expands and pushes the piston down – the only stroke that delivers power to the crankshaft.
Exhaust
The exhaust valve opens and the piston moves up, pushing the burnt gases out. Then the cycle starts again with intake.
Two turns per cycle
Each stroke is half a turn of the crankshaft, so four strokes take two turns. Each cylinder therefore has one power stroke for every two revolutions:
power strokes per cylinder per minute = rpm ÷ 2
When combustion goes wrong
- Detonation: explosive, uncontrolled burning – at high power with high cylinder head temperature. Higher-octane fuel resists it.
- Pre-ignition: the charge lights before the spark, from a hot spot such as a carbon deposit or a cracked plug insulator.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Aircraft General Knowledge lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.