Map projections for aviation charts – Ground School Basics aviation lesson
Lesson 52 of 90 in the Ground School Basics course (ages 11–16)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
Learn why no flat map can show the round Earth perfectly, and why aviation charts use a conic projection while sea charts use Mercator.
- Time
- 40 minutes + 10 min homework
- Course
- Ground School Basics (ages 11–16)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.
For parents: how to use this lesson
The orange-peel activity is messy but memorable. The scale examples are good practice in converting units. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If you were making a map for a pilot flying across one country, which property would you most want to keep correct – shapes, areas, distances or directions? Why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking Greenland really is as big as Africa because it looks that way on a Mercator map. Mercator stretches areas near the poles. A globe shows true sizes.
- Thinking a 1:500,000 chart shows more detail than a 1:250,000 chart. The bigger the second number, the smaller everything is drawn. 1:250,000 shows more detail.
- Thinking there is a perfect flat map. Every projection distorts something; map makers choose what to keep correct.
Hands-on: Peel a satsuma or orange in as few pieces as you can and try to press the peel flat on a plate. Notice where it splits or stretches. Then roll a sheet of paper into a cone around a ball and imagine shining a light from the centre: that is the idea behind a conic projection.
What your child will learn
- I can explain why every flat map distorts the Earth.
- I can name the three families of projection: cylinder, cone and plane.
- I can describe the Mercator, gnomonic and Lambert conformal conic projections.
- I can use a chart scale to turn map distance into real distance.
Key words
- projection
- A mathematical way of drawing the round Earth on a flat surface.
- conformal
- A projection that keeps the shapes of small areas and angles correct.
- standard parallel
- A line of latitude where a conic projection has no distortion.
- scale
- The ratio between distance on the map and real distance, such as 1:500,000.
The big ideas
A projection is a way of showing all or part of the round Earth on a flat surface, and it cannot be done without distortion. A flat map can show true directions, true distances, true areas or true shapes – but never all four at once.
Many projections are built on a shape that can be unrolled flat: a cylinder, a cone or a plane. The Mercator projection uses a cylinder; any straight line on it is a rhumb line, which is why it suits sea navigation, but areas near the poles are grossly stretched. The gnomonic projection uses a plane; any straight line on it is a great circle. The Lambert conformal conic uses a cone that cuts the globe along two standard parallels: distances are true along those parallels and reasonably accurate nearby, and shapes are kept.
Aeronautical charts cover limited regions, and a conformal conic projection keeps angles and shapes good across such a region. US sectional charts are drawn at a scale of 1:500,000 and terminal area charts at 1:250,000.
Read-through: the teaching steps
Peel an orange
Try to flatten orange peel and it tears or stretches. A map projection has the same problem: something – direction, distance, area or shape – must give.
Three families
- Cylindrical: projected onto a cylinder (Mercator)
- Conic: projected onto a cone (Lambert conformal conic)
- Planar or azimuthal: projected onto a flat plane (gnomonic)
Conformal or equal-area
A conformal map keeps small shapes and angles correct but distorts sizes. An equal-area map keeps areas correct but distorts shapes. No flat map can be both.
Mercator
Straight lines are rhumb lines (constant direction), which makes steering simple. But areas grow hugely towards the poles, and the straight line is usually not the shortest route.
A great circle is the shortest route between two places on a globe; a rhumb line keeps the same direction all the way but is longer. Lambert conformal conic
A cone cuts the globe at two standard parallels. Along them there is no distortion; between and near them distortion stays small. It is conformal, so angles measured on the chart are good.
Reading the scale
A scale of 1:500,000 means 1 cm on the chart is 500,000 cm (5 km) on the ground. A 1:250,000 chart shows more detail over a smaller area.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Navigation lessons · Ground School Basics course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.