Fly-by-wire – Ground School Basics aviation lesson
Lesson 36 of 90 in the Ground School Basics course (ages 11–16)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
Discover how computers and electric wires replaced cables and pushrods between the pilot and the control surfaces – and why that changed aircraft design.
- Time
- 35 minutes + 10 min homework
- Course
- Ground School Basics (ages 11–16)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.
For parents: how to use this lesson
This links to computing (input, process, output) and to reliability engineering. The "three computers voting" idea is a great discussion of redundancy. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If a computer can stop a pilot from making a dangerous move, should the pilot ever be allowed to override it? Why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking fly-by-wire means radio control from the ground. The pilot is on board; "wire" refers to electrical signals replacing cables and pushrods.
- Thinking one computer is enough. Fly-by-wire systems use redundancy – the F-8's second phase used a triple-redundant system.
- Thinking fly-by-wire only matters for fighters. NASA notes it in airliners such as the Boeing 777 and in the Space Shuttle.
Hands-on: Build a "mechanical" control with a string tied from a pencil (stick) to a cardboard flap. Then act out "fly-by-wire": one person calls out stick movements and a second person (the computer) decides how far to move the flap. What could go wrong, and how would a third person help?
What your child will learn
- I can explain the difference between mechanical flight controls and fly-by-wire.
- I can describe NASA's F-8 Digital Fly-By-Wire research aircraft and its first flight in 1972.
- I can give advantages of fly-by-wire: weight, redundancy, and allowing less stable designs.
- I can explain why fly-by-wire systems use redundancy.
Key words
- mechanical controls
- Cables, pushrods and pulleys that link the pilot's controls directly to the control surfaces.
- fly-by-wire
- A system where the pilot's inputs are turned into electrical signals and a computer commands the control surfaces.
- digital flight-control computer
- The computer in a fly-by-wire system that decides how to move the control surfaces.
- redundancy
- Having more than one of a part or system, so if one fails another takes over.
- sidestick
- A small control stick at the side of the cockpit, first tested for the F-16 on NASA's F-8 research aircraft.
The big ideas
In most early aircraft, the pilot's controls were joined to the control surfaces by cables and pushrods. NASA's fact sheet on its F-8 Digital Fly-By-Wire research aircraft explains the alternative: an electronic flight-control system coupled with a digital computer replaces the conventional mechanical controls. Wires carry the pilot's commands to the computer, which commands the control surfaces.
NASA flew a modified F-8 Crusader as the first aircraft with a digital fly-by-wire system, making the first fully fly-by-wire flight in 1972. In its first phase it used a spare Apollo digital flight-control computer; in its second phase this was replaced by a triple-redundant digital system. The programme lasted 13 years and ended with its 210th flight in 1985.
NASA lists the benefits: the redundant system was safer, wires were less vulnerable than hydraulic lines, and the system was lighter and took less space, which could save fuel or carry more. Computers can also make adjustments far more often than a pilot, so designers can build aircraft that are more manoeuvrable but less naturally stable. Fly-by-wire is now used in aircraft from the F/A-18 fighter to the Boeing 777 airliner, and it flew in the Space Shuttle.
Read-through: the teaching steps
Mechanical controls
Cables, pulleys and pushrods link the pilot's control column and pedals directly to the ailerons, elevator and rudder. Move the stick and the surface moves.
Ailerons roll the aircraft, the elevator pitches it and the rudder yaws it. Fly-by-wire
The pilot's control sends an electrical signal. A digital flight-control computer reads it, works out what the control surfaces should do, and commands actuators to move them.
The F-8 test aircraft
- First fully fly-by-wire flight: 1972, in a modified F-8 Crusader
- Phase 1: a spare Apollo digital flight-control computer
- Phase 2: a triple-redundant digital system
- Final flight in 1985, the 210th of the programme
Why redundancy?
If a single computer failed in a fly-by-wire aircraft, there would be no mechanical backup. So systems use more than one computer – the F-8's second phase used three – so that a single failure does not leave the aircraft without control.
Benefits
- Lighter and smaller than mechanical and hydraulic links – saving fuel or adding payload
- Wires less vulnerable to damage than hydraulic lines
- Computers adjust far faster than a pilot, so less naturally stable, more manoeuvrable designs become possible
- Extra protections, such as the angle-of-attack limiter tested on the F-8
Where it is used
NASA notes digital fly-by-wire in the Space Shuttle and in aircraft from the F/A-18 to the Boeing 777. The F-8 was the test bed for the sidestick used in the F-16.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Instruments lessons · Ground School Basics course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.